> Products > USB Hub Products > Hub Controller
GL3590-S
Overview

Genesys GL3590 is a low-power, and configurable USB 3.1 Gen 2 hub controller. It is compliant with the USB 3.1 specification. GL3590 integrates Genesys Logic self-developed USB 3.1 Gen 2 Super Speed transmitter/receiver physical layer (PHY) and USB 2.0 High-Speed PHY. It supports Super Speed, Hi-Speed, and Full-Speed USB connections and is fully backward compatible to all USB 2.0 and USB 1.1 hosts. GL3590 also implements multiple TT architecture providing dedicated TT to each downstream (DS) port, which guarantees Full-Speed(FS) data passing bandwidth when multiple FS devices perform heavy loading operations.

 

GL3590 features the native fast-charging and complies with USB-IF battery charging specification rev1.2. With different configurations, it could fast-charge Apple devices with up to 2.4A, Samsung Galaxy devices, and any device complaint with BC1.2/1.1. It also allows portable devices to draw up to 1.5A from GL3590 charging downstream ports (CDP) or dedicated charging port (DCP). It can enable systems to fast charge handheld devices even during “Sleep” and “Power-off” modes.

 

With different part numbers, GL3590 also has USB Type-C function integrated (GL3590-S).


  • Native PD3.0 and USB-C™ functions integrated; BOM Cost Saving for PD and USB-C™ applications
    • Featuring native PD3.0 and USB-C™ functions
    • USB-bridge TCPM/TCPCI support
    • NO external USB switch needed for USB-C™ applications
    • Billboard integrated for PD alternate mode
  • Support multiple upstream port without external switch
  • Host bridge hardware engine implemented for KM applications
  • Hot-key detection integrated to switch multiple upstream port
  • HID (Human interface device) integrated
  • Integrating 8 power/current monitors for power management
  • Flexible configurations by firmware, SMBUS, vendor command, and hardware pin-strapping
  • Support specific port disabled/enabled
  • Programmable GPIOs and Customized Flicking/Breathing LED
  • Firmware upgradable through USB or I2C interface
  • Native fast-charging, support USB BC v1.2, Apple 1A/2.4A and Samsung Galaxy devices

Copyright ◎2018 創惟科技股份有限公司 All Rights Reserved.